{"title":"Prusa INDX Conversion Kits","description":"\u003cp\u003eThe Bondtech INDX passive toolchanger for the Prusa CORE One and CORE One+. Up to eight independent toolheads, roughly 12 second tool changes, and about 13 milligrams of waste per swap. Free shipping Australia wide. Dispatch date TBA, confirmed soon.\u003c\/p\u003e","products":[{"product_id":"prusa-indx-4-tool-kit","title":"Prusa INDX 4-Tool Conversion Kit for CORE One\/+","description":"\u003cp\u003e\u003cstrong\u003eTurn your Prusa CORE One into a true multi material machine.\u003c\/strong\u003e The INDX 4-Tool Conversion Kit adds the Bondtech INDX passive toolchanger to a printer you already own. Roughly 12 second tool changes, induction heated nozzles, and about 13 milligrams of purge per swap instead of a wipe tower.\u003c\/p\u003e\n\n\u003cp\u003eThis is a conversion kit, not a new machine. Install the Smart Head, mount the tool docks, load your filaments, and the printer does a quick calibration. Same printer, considerably more capability.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eWant every position populated on day one?\u003c\/em\u003e See the \u003ca href=\"\/products\/prusa-indx-8-tool-kit\"\u003e\u003cstrong\u003eINDX 8-Tool Kit\u003c\/strong\u003e\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eWhy INDX?\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e~12 second true toolchange.\u003c\/strong\u003e Measured from the last extrusion on one material to the first extrusion on the next, on the model itself. No wipe towers, no purge blocks.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e13 mg of waste per swap (0.013 g).\u003c\/strong\u003e Less than a grain of rice. Prusa rates it at 5x less waste than the most efficient systems and 30x less than standard filament rewinding systems.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInduction heated nozzles.\u003c\/strong\u003e The Smart Head carries the coil, so a nozzle goes from cold to printing temperature in seconds and cools just as fast when parked. No oozing or stringing from idle nozzles.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardened high flow nozzles on every tool.\u003c\/strong\u003e Each passive tool ships with a hardened 0.4 mm CHT nozzle as standard. Hardened by default means carbon fibre, glass filled and other abrasive filaments print without swapping hardware first, and without chewing out a brass nozzle the way a shared single nozzle system does.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePassive toolheads.\u003c\/strong\u003e No electronics on the individual tools, so adding a fifth, sixth or eighth tool means adding a nozzle and a dock, not another full print head.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDynamic Dual Drive (DX) extruder.\u003c\/strong\u003e Drive gear tension adjusts itself, so you can move from TPU to rigid fibre filled filaments without retuning.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdvanced nozzle wiper.\u003c\/strong\u003e Residue is cleared before printing resumes, and the micro blob is deposited into a purge collector rather than onto your bed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eToolhead offset calibration in ~15 seconds per tool.\u003c\/strong\u003e A dual target sensor mounted outside the print area, about 20x faster than the stock XL routine, plus LoadCell first layer calibration.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDoors closed at all times.\u003c\/strong\u003e The CORE One ventilation system is retained, so PLA and PETG print with the chamber shut.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOpen filament system.\u003c\/strong\u003e Any brand, any spool size, any 1.75 mm filament up to 300 C. No proprietary RFID chips.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrusa USS Drybox compatible.\u003c\/strong\u003e INDX spoolholders mount to the Drybox, all eight of them if you want.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's in the box (4-Tool Kit)\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Smart Head (induction coil, DX extruder, contactless temperature sensor)\u003c\/li\u003e\n  \u003cli\u003e4 x passive tools with hardened CHT nozzles (0.4 mm as standard)\u003c\/li\u003e\n  \u003cli\u003eINDX Mounting Plate, with 4 further positions ready for future upgrades\u003c\/li\u003e\n  \u003cli\u003ePTFE tubing and all mounting parts\u003c\/li\u003e\n  \u003cli\u003eTop cover with automatic ventilation\u003c\/li\u003e\n  \u003cli\u003e4 x spoolholders\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMaterial support\u003c\/h3\u003e\n\u003cp\u003ePLA, PETG, ASA, ABS, PC, PCCF, PA, TPU, PVA, BVOH, and any other 1.75 mm filament up to 300 C.\u003c\/p\u003e\n\u003cp\u003eBecause every material has its own dedicated nozzle and path, there is no shared melt zone: no cross contamination, no colour bleed, TPU alongside PETG in the same print, and different nozzle sizes in the same job.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePassive toolchanger with induction heated nozzles\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax tools\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 on CORE One\/+\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax nozzle temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300 C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFilament diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle supplied\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHardened 0.4 mm CHT (high flow), one per tool, fitted as standard\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible nozzle sizes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.25, 0.4, 0.5, 0.6, 0.8, 1.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle sizes loadable at once\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePrusa quote 0.25 to 0.8 mm across the installed tools\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAbrasive filament ready\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes, hardened as standard, no nozzle upgrade needed\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHardened, high flow (CHT)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeating system\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eContactless induction coil (on Smart Head)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTemperature sensing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWireless and contactless\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eExtrusion system\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDynamic Dual Drive (DX) auto adjusting grip\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTool coupling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMechanical Maxwell coupling\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild volume impact\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 mm reduction in X axis, 15 mm reduction in Y axis\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild volume with INDX installed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e248 x 205 x 270 mm (X x Y x Z)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePrinter size with INDX installed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e620 mm wide, 690 mm high, 470 mm deep (doors closed, spools attached)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible printer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePrusa CORE One\/+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Prusa CORE One and CORE One+.\u003c\/p\u003e\n\u003cp\u003eIf you are on a base CORE One, the CORE One+ (Gen 2) upgrade is required alongside the INDX. Prusa ships that upgrade bundled with some INDX orders, and it can also be bought separately and fitted at the same time. Talk to us before ordering and we will confirm what your machine needs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot compatible with:\u003c\/strong\u003e CORE One L, and no MK, MINI, XL, HT90 or SL series printer.\u003c\/p\u003e\n\u003cp\u003eYour existing CORE One print sheets, filament collection, PrusaSlicer profiles and Prusa Connect setup all carry over unchanged.\u003c\/p\u003e\n\n\u003ch3\u003e4-Tool or 8-Tool?\u003c\/h3\u003e\n\u003cp\u003eBoth kits contain the same Smart Head and the same docking hardware. The only difference is how many passive tools and spoolholders come in the box. The 4-Tool Kit is the starter: four nozzles now, with the mounting plate already prepared for four more whenever you want them.\u003c\/p\u003e\n\u003cp\u003eWant the full set on day one? \u003ca href=\"\/products\/prusa-indx-8-tool-kit\"\u003eView the 8-Tool Kit\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch3\u003eAvailability and shipping\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFree shipping Australia wide.\u003c\/strong\u003e No freight charge on INDX kits, to any address in Australia.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDispatch date is TBA.\u003c\/strong\u003e Prusa has the Founder's Edition shipping now and the Prusa Edition shipping from mid August 2026. We have not been given a firm Australian dispatch window yet. It will be soon, and we will contact you with the date as soon as Prusa confirms it.\u003c\/li\u003e\n  \u003cli\u003eOrdering now holds your place in the allocation queue. You will be asked to acknowledge the TBA dispatch date at checkout.\u003c\/li\u003e\n  \u003cli\u003eSold by SIDDAMENT as an authorised Australian Prusa reseller, with local support and warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePrusa's own Australian RRP for this kit is A$1,199.00, duties and taxes included, and it is currently out of stock on prusa3d.com.\u003c\/em\u003e\u003c\/p\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":52907262443799,"sku":"PRUSA-INDX-4T-COREONE","price":1199.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/9168\/1815\/files\/prusa-indx-4t-coreone-rebuilt.png?v=1777904260"},{"product_id":"prusa-indx-8-tool-kit","title":"Prusa INDX 8-Tool Conversion Kit for CORE One\/+","description":"\u003cp\u003e\u003cstrong\u003eEight nozzles. True multi material. Virtually zero waste.\u003c\/strong\u003e The INDX 8-Tool Conversion Kit is the full version of the Bondtech INDX passive toolchanger, for makers, prototypers and small batch shops who want every material option loaded and ready without stopping a print.\u003c\/p\u003e\n\n\u003cp\u003eThis is a conversion kit, not a new machine. Install the Smart Head, mount the tool docks, load eight filaments, and the printer does a quick calibration. Same printer, considerably more capability.\u003c\/p\u003e\n\n\u003cp\u003e\u003cem\u003eLooking for the smaller kit?\u003c\/em\u003e See the \u003ca href=\"\/products\/prusa-indx-4-tool-kit\"\u003e\u003cstrong\u003eINDX 4-Tool Kit\u003c\/strong\u003e\u003c\/a\u003e, which expands to 8 later.\u003c\/p\u003e\n\n\u003ch3\u003eWhy INDX?\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e~12 second true toolchange.\u003c\/strong\u003e Measured from the last extrusion on one material to the first extrusion on the next, on the model itself. No wipe towers, no purge blocks.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e13 mg of waste per swap (0.013 g).\u003c\/strong\u003e Less than a grain of rice. Prusa rates it at 5x less waste than the most efficient systems and 30x less than standard filament rewinding systems.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInduction heated nozzles.\u003c\/strong\u003e The Smart Head carries the coil, so a nozzle goes from cold to printing temperature in seconds and cools just as fast when parked. No oozing or stringing from idle nozzles.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHardened high flow nozzles on every tool.\u003c\/strong\u003e Each passive tool ships with a hardened 0.4 mm CHT nozzle as standard. Hardened by default means carbon fibre, glass filled and other abrasive filaments print without swapping hardware first, and without chewing out a brass nozzle the way a shared single nozzle system does.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePassive toolheads.\u003c\/strong\u003e No electronics on the individual tools, so adding a fifth, sixth or eighth tool means adding a nozzle and a dock, not another full print head.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDynamic Dual Drive (DX) extruder.\u003c\/strong\u003e Drive gear tension adjusts itself, so you can move from TPU to rigid fibre filled filaments without retuning.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAdvanced nozzle wiper.\u003c\/strong\u003e Residue is cleared before printing resumes, and the micro blob is deposited into a purge collector rather than onto your bed.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eToolhead offset calibration in ~15 seconds per tool.\u003c\/strong\u003e A dual target sensor mounted outside the print area, about 20x faster than the stock XL routine, plus LoadCell first layer calibration.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDoors closed at all times.\u003c\/strong\u003e The CORE One ventilation system is retained, so PLA and PETG print with the chamber shut.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOpen filament system.\u003c\/strong\u003e Any brand, any spool size, any 1.75 mm filament up to 300 C. No proprietary RFID chips.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePrusa USS Drybox compatible.\u003c\/strong\u003e INDX spoolholders mount to the Drybox, all eight of them if you want.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eWhat's in the box (8-Tool Kit)\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x Smart Head (induction coil, DX extruder, contactless temperature sensor)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e8 x passive tools\u003c\/strong\u003e with hardened CHT nozzles (0.4 mm as standard)\u003c\/li\u003e\n  \u003cli\u003eINDX Mounting Plate, full 8 position\u003c\/li\u003e\n  \u003cli\u003ePTFE tubing and all mounting parts\u003c\/li\u003e\n  \u003cli\u003eTop cover with automatic ventilation\u003c\/li\u003e\n  \u003cli\u003e\u003cstrong\u003e8 x spoolholders\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eMaterial support\u003c\/h3\u003e\n\u003cp\u003ePLA, PETG, ASA, ABS, PC, PCCF, PA, TPU, PVA, BVOH, and any other 1.75 mm filament up to 300 C.\u003c\/p\u003e\n\u003cp\u003eBecause every material has its own dedicated nozzle and path, there is no shared melt zone: no cross contamination, no colour bleed, TPU alongside PETG in the same print, and different nozzle sizes in the same job.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSystem type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePassive toolchanger with induction heated nozzles\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax tools\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 on CORE One\/+\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax nozzle temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300 C\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFilament diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle supplied\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHardened 0.4 mm CHT (high flow), one per tool, fitted as standard\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible nozzle sizes\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.25, 0.4, 0.5, 0.6, 0.8, 1.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle sizes loadable at once\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePrusa quote 0.25 to 0.8 mm across the installed tools\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAbrasive filament ready\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes, hardened as standard, no nozzle upgrade needed\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle type\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHardened, high flow (CHT)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHeating system\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eContactless induction coil (on Smart Head)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTemperature sensing\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eWireless and contactless\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eExtrusion system\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDynamic Dual Drive (DX) auto adjusting grip\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTool coupling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMechanical Maxwell coupling\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild volume impact\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 mm reduction in X axis, 15 mm reduction in Y axis\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild volume with INDX installed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e248 x 205 x 270 mm (X x Y x Z)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePrinter size with INDX installed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e620 mm wide, 690 mm high, 470 mm deep (doors closed, spools attached)\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCompatible printer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePrusa CORE One\/+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Prusa CORE One and CORE One+.\u003c\/p\u003e\n\u003cp\u003eIf you are on a base CORE One, the CORE One+ (Gen 2) upgrade is required alongside the INDX. Prusa ships that upgrade bundled with some INDX orders, and it can also be bought separately and fitted at the same time. Talk to us before ordering and we will confirm what your machine needs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNot compatible with:\u003c\/strong\u003e CORE One L, and no MK, MINI, XL, HT90 or SL series printer.\u003c\/p\u003e\n\u003cp\u003eYour existing CORE One print sheets, filament collection, PrusaSlicer profiles and Prusa Connect setup all carry over unchanged.\u003c\/p\u003e\n\n\u003ch3\u003e4-Tool or 8-Tool?\u003c\/h3\u003e\n\u003cp\u003eBoth kits contain the same Smart Head and the same docking hardware. The only difference is how many passive tools and spoolholders come in the box. The 8-Tool Kit gives you full 8 material capability from day one: eight tools, eight spoolholders, every position populated, and eight different nozzle sizes always at the ready.\u003c\/p\u003e\n\u003cp\u003ePrefer to start smaller and add tools later? \u003ca href=\"\/products\/prusa-indx-4-tool-kit\"\u003eView the 4-Tool Kit\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch3\u003eAvailability and shipping\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFree shipping Australia wide.\u003c\/strong\u003e No freight charge on INDX kits, to any address in Australia.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDispatch date is TBA.\u003c\/strong\u003e Prusa has the Founder's Edition shipping now and the Prusa Edition shipping from mid August 2026. We have not been given a firm Australian dispatch window yet. It will be soon, and we will contact you with the date as soon as Prusa confirms it.\u003c\/li\u003e\n  \u003cli\u003eOrdering now holds your place in the allocation queue. You will be asked to acknowledge the TBA dispatch date at checkout.\u003c\/li\u003e\n  \u003cli\u003eSold by SIDDAMENT as an authorised Australian Prusa reseller, with local support and warranty.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePrusa's own Australian RRP for this kit is A$1,599.00, duties and taxes included, and it is currently out of stock on prusa3d.com.\u003c\/em\u003e\u003c\/p\u003e","brand":"Prusa","offers":[{"title":"Default Title","offer_id":52907283546391,"sku":"PRUSA-INDX-8T-COREONE","price":1599.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/9168\/1815\/files\/prusa-fix-PRUSA-INDX-8T-COREONE_514bed5d-94e4-4eea-864f-234915431d74.png?v=1777213902"}],"url":"https:\/\/siddament.com.au\/collections\/prusa-indx.oembed","provider":"SIDDAMENT","version":"1.0","type":"link"}