{"title":"CNTRL P | Australian Made Filament","description":"\u003cp\u003eCNTRL P is a 3D printer filament brand made in Sydney. It is extruded, checked and dispatched in Australia by Siddament. The launch range is deliberately small: PLA, PETG, ABS and ASA in black and white, plus two carbon fibre grades, ASA-CF and PC-CF.\u003c\/p\u003e","products":[{"product_id":"cntrl-p-pla","title":"CNTRL P PLA Filament | Australian Made | 1.75mm","description":"\u003cp\u003eThe everyday workhorse of the range. Easy to print, clean and reliable, in black and white at launch, tuned to run fast on modern printers without giving up quality at lower speeds.\u003c\/p\u003e\n\u003ch2\u003ePrint at a glance\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNozzle\u003c\/th\u003e\n\u003ctd\u003e200 to 225 C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBed\u003c\/th\u003e\n\u003ctd\u003e55 to 60 C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart cooling fan\u003c\/th\u003e\n\u003ctd\u003e100 percent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEnclosure\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm, held to a tight tolerance window\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eWhat sets it apart\u003c\/h2\u003e\n\u003cp\u003eLocally produced and checked at every step. The design goal is simple: the spool you load today and the spool you load in six months should behave identically on your printer.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePLA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCNTRL P by Siddament\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColours\u003c\/th\u003e\n\u003ctd\u003eBlack, White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMade in\u003c\/th\u003e\n\u003ctd\u003eSydney, Australia (filament extrusion)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWorks with\u003c\/th\u003e\n\u003ctd\u003eAny printer that runs standard 1.75mm filament\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eExtruded in Sydney\u003c\/h2\u003e\n\u003cp\u003eCNTRL P is a 3D printer filament brand made in Sydney. It is extruded, checked and dispatched in Australia by Siddament. The extrusion line, the quality checking and the dispatch are all in the same building.\u003c\/p\u003e\n\u003cp\u003eA restock is a production run down the road, not a container crossing an ocean. Weeks rather than months.\u003c\/p\u003e\n\u003ch2\u003eMeasured diameter on every spool\u003c\/h2\u003e\n\u003cp\u003eThe diameter is measured on the line as the spool is wound, and that spool's own number is what you can look up. Not a figure copied off a datasheet. Look yours up on the \u003ca href=\"https:\/\/cntrlp.com.au\/check-your-spool\"\u003echeck your spool page\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003ch3\u003eWhere is CNTRL P PLA made?\u003c\/h3\u003e\n\u003cp\u003eSydney. The extrusion line, the quality checking and the dispatch are all in the same building.\u003c\/p\u003e\n\u003ch3\u003eWhat printers does CNTRL P PLA work with?\u003c\/h3\u003e\n\u003cp\u003eAny printer that runs standard 1.75mm filament. It also supports the open filament tag standard, so a compatible machine can read the spool and load the right settings for it.\u003c\/p\u003e\n\u003ch3\u003eWhy only black and white?\u003c\/h3\u003e\n\u003cp\u003eBecause they are the easiest colours to keep identical from run to run, and they cover most real work. Prove the process on the colours that hold best, then add the ones that are harder.\u003c\/p\u003e\n\u003ch3\u003eCan I get a custom colour?\u003c\/h3\u003e\n\u003cp\u003eYes, and that is one of the real advantages of local extrusion. Bring a hex, a Pantone reference or a physical sample. See the \u003ca href=\"https:\/\/cntrlp.com.au\/custom-colour\"\u003ecustom colour page\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eIs PLA filament good for beginners?\u003c\/h3\u003e\u003cp\u003ePLA filament is the usual starting point for a new 3D printer. PLA prints at low temperatures, does not need an enclosure and rarely warps, so most printers run it well on default settings. PLA is also available in more colours and finishes than any other material.\u003c\/p\u003e\u003ch3\u003eWhat temperature should I print PLA at?\u003c\/h3\u003e\u003cp\u003eMost PLA prints well with the nozzle between 190 and 220°C and the bed at 50 to 60°C. Silk and matte PLA often like the upper half of that nozzle range. Run the part cooling fan at full speed once the first layers are down.\u003c\/p\u003e\u003ch3\u003eCan PLA be used outdoors?\u003c\/h3\u003e\u003cp\u003ePLA is not a good outdoor material in Australia. PLA softens at about 55°C, which a part can reach in direct sun or inside a parked car, and it will sag or warp. ASA and PETG handle heat and weather far better than PLA.\u003c\/p\u003e\u003cp\u003eMore about the range on the \u003ca href=\"https:\/\/siddament.com.au\/pages\/cntrl-p\"\u003eCNTRL P page\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eAbout PLA filament\u003c\/h2\u003e\u003cp\u003ePLA is the easiest 3D printer filament to print. It needs no enclosure, sticks to a bed at 50 to 60°C and holds fine detail.\u003c\/p\u003e\u003ch3\u003eWhat PLA is good for\u003c\/h3\u003e\u003cp\u003ePLA suits models, cosplay, toys, prototypes, jigs and anything that lives indoors. It is stiff and holds sharp detail. It softens at around 55°C, so it is the wrong choice for a part left in a hot car or in direct summer sun. For outdoor or warm parts look at PETG or ASA.\u003c\/p\u003e\u003cp\u003eBrowse all \u003ca href=\"https:\/\/siddament.com.au\/collections\/all-pla\"\u003ePLA filament\u003c\/a\u003e or the full \u003ca href=\"https:\/\/siddament.com.au\/collections\/cntrl-p-filament\"\u003eCNTRL P Australian made filament\u003c\/a\u003e range.\u003c\/p\u003e","brand":"CNTRL P","offers":[{"title":"Black","offer_id":67619186278679,"sku":null,"price":19.99,"currency_code":"AUD","in_stock":false},{"title":"White","offer_id":67619186311447,"sku":null,"price":19.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/9168\/1815\/files\/cntrlp-spool-black.webp?v=1790684533"},{"product_id":"cntrl-p-petg","title":"CNTRL P PETG Filament | Australian Made | 1.75mm","description":"\u003cp\u003eThe functional, impact-tolerant option for parts that have a job to do. In black and white at launch.\u003c\/p\u003e\n\u003ch2\u003eWhat PETG is good for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFunctional indoor parts that take load or impact\u003c\/li\u003e\n\u003cli\u003eElectronics enclosures and project boxes\u003c\/li\u003e\n\u003cli\u003ePlant pots and waterproof containers\u003c\/li\u003e\n\u003cli\u003eShaded outdoor parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat CNTRL P PETG brings\u003c\/h2\u003e\n\u003cp\u003eDiameter consistency that holds across batches and a low tendency to string when dialled in.\u003c\/p\u003e\n\u003ch2\u003ePrint at a glance\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNozzle\u003c\/th\u003e\n\u003ctd\u003e230 to 245 C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBed\u003c\/th\u003e\n\u003ctd\u003e75 to 85 C, glue stick on PEI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart cooling fan\u003c\/th\u003e\n\u003ctd\u003e30 to 60 percent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEnclosure\u003c\/th\u003e\n\u003ctd\u003eNot required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePETG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCNTRL P by Siddament\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColours\u003c\/th\u003e\n\u003ctd\u003eBlack, White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMade in\u003c\/th\u003e\n\u003ctd\u003eSydney, Australia (filament extrusion)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWorks with\u003c\/th\u003e\n\u003ctd\u003eAny printer that runs standard 1.75mm filament\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eExtruded in Sydney\u003c\/h2\u003e\n\u003cp\u003eCNTRL P is a 3D printer filament brand made in Sydney. It is extruded, checked and dispatched in Australia by Siddament. The extrusion line, the quality checking and the dispatch are all in the same building.\u003c\/p\u003e\n\u003cp\u003eA restock is a production run down the road, not a container crossing an ocean. Weeks rather than months.\u003c\/p\u003e\n\u003ch2\u003eMeasured diameter on every spool\u003c\/h2\u003e\n\u003cp\u003eThe diameter is measured on the line as the spool is wound, and that spool's own number is what you can look up. Not a figure copied off a datasheet. Look yours up on the \u003ca href=\"https:\/\/cntrlp.com.au\/check-your-spool\"\u003echeck your spool page\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003ch3\u003eWhere is CNTRL P PETG made?\u003c\/h3\u003e\n\u003cp\u003eSydney. The extrusion line, the quality checking and the dispatch are all in the same building.\u003c\/p\u003e\n\u003ch3\u003eWhat printers does CNTRL P PETG work with?\u003c\/h3\u003e\n\u003cp\u003eAny printer that runs standard 1.75mm filament. It also supports the open filament tag standard, so a compatible machine can read the spool and load the right settings for it.\u003c\/p\u003e\n\u003ch3\u003eWhy only black and white?\u003c\/h3\u003e\n\u003cp\u003eBecause they are the easiest colours to keep identical from run to run, and they cover most real work. Prove the process on the colours that hold best, then add the ones that are harder.\u003c\/p\u003e\n\u003ch3\u003eCan I get a custom colour?\u003c\/h3\u003e\n\u003cp\u003eYes, and that is one of the real advantages of local extrusion. Bring a hex, a Pantone reference or a physical sample. See the \u003ca href=\"https:\/\/cntrlp.com.au\/custom-colour\"\u003ecustom colour page\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eIs PETG stronger than PLA?\u003c\/h3\u003e\u003cp\u003ePETG is tougher than PLA but not stiffer. PETG flexes and absorbs impact where PLA cracks, and PETG keeps its shape to about 75°C against roughly 55°C for PLA. PLA is the stiffer of the two, so it wins for rigid parts kept at room temperature.\u003c\/p\u003e\u003ch3\u003eWhat temperature should I print PETG at?\u003c\/h3\u003e\u003cp\u003ePETG usually prints with the nozzle at 230 to 250°C and the bed at 70 to 85°C. Run the part cooling fan at 30 to 50 percent. Too much cooling weakens the bond between PETG layers, and too little causes sagging on overhangs.\u003c\/p\u003e\u003ch3\u003eDoes PETG need an enclosure?\u003c\/h3\u003e\u003cp\u003ePETG does not need an enclosure. PETG warps far less than ABS or ASA and prints well on an open printer. An enclosure can help very large PETG parts in a cold room, but most PETG prints do not need one.\u003c\/p\u003e\u003cp\u003eMore about the range on the \u003ca href=\"https:\/\/siddament.com.au\/pages\/cntrl-p\"\u003eCNTRL P page\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eAbout PETG filament\u003c\/h2\u003e\u003cp\u003ePETG is a tough, slightly flexible 3D printer filament that handles more heat than PLA. It holds its shape to about 75°C, resists moisture and most chemicals, and prints without an enclosure.\u003c\/p\u003e\u003ch3\u003eWhat PETG is good for\u003c\/h3\u003e\u003cp\u003ePETG suits brackets, enclosures, garden and garage parts, printer parts and anything that takes knocks. It bends before it snaps, where PLA cracks. It is not UV stable over years in full sun, so for long term outdoor parts ASA is the better pick.\u003c\/p\u003e\u003cp\u003eBrowse all \u003ca href=\"https:\/\/siddament.com.au\/collections\/petg\"\u003ePETG filament\u003c\/a\u003e or the full \u003ca href=\"https:\/\/siddament.com.au\/collections\/cntrl-p-filament\"\u003eCNTRL P Australian made filament\u003c\/a\u003e range.\u003c\/p\u003e","brand":"CNTRL P","offers":[{"title":"Black","offer_id":67619186409751,"sku":null,"price":18.99,"currency_code":"AUD","in_stock":false},{"title":"White","offer_id":67619186442519,"sku":null,"price":18.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/9168\/1815\/files\/cntrlp-spool-black.webp?v=1790684533"},{"product_id":"cntrl-p-abs","title":"CNTRL P ABS Filament | Australian Made | 1.75mm","description":"\u003cp\u003eEngineering-grade, heat-tolerant ABS in black and white. The classic for indoor functional parts, tool housings and enclosures that face some heat.\u003c\/p\u003e\n\u003ch2\u003eWhat ABS is good for\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIndoor parts that face moderate heat (over 50 C)\u003c\/li\u003e\n\u003cli\u003eTool housings and electronics enclosures\u003c\/li\u003e\n\u003cli\u003eVapour-smoothable display pieces (acetone smoothing)\u003c\/li\u003e\n\u003cli\u003eFunctional bricks and mechanical parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePrint at a glance\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNozzle\u003c\/th\u003e\n\u003ctd\u003e240 to 260 C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBed\u003c\/th\u003e\n\u003ctd\u003e95 to 110 C with glue stick or ABS slurry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart cooling fan\u003c\/th\u003e\n\u003ctd\u003eOff or minimal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEnclosure\u003c\/th\u003e\n\u003ctd\u003eStrongly recommended\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eCNTRL P by Siddament\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDiameter\u003c\/th\u003e\n\u003ctd\u003e1.75 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eColours\u003c\/th\u003e\n\u003ctd\u003eBlack, White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMade in\u003c\/th\u003e\n\u003ctd\u003eSydney, Australia (filament extrusion)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWorks with\u003c\/th\u003e\n\u003ctd\u003eAny printer that runs standard 1.75mm filament\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\n\u003ch2\u003eExtruded in Sydney\u003c\/h2\u003e\n\u003cp\u003eCNTRL P is a 3D printer filament brand made in Sydney. It is extruded, checked and dispatched in Australia by Siddament. The extrusion line, the quality checking and the dispatch are all in the same building.\u003c\/p\u003e\n\u003cp\u003eA restock is a production run down the road, not a container crossing an ocean. Weeks rather than months.\u003c\/p\u003e\n\u003ch2\u003eMeasured diameter on every spool\u003c\/h2\u003e\n\u003cp\u003eThe diameter is measured on the line as the spool is wound, and that spool's own number is what you can look up. Not a figure copied off a datasheet. Look yours up on the \u003ca href=\"https:\/\/cntrlp.com.au\/check-your-spool\"\u003echeck your spool page\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eCommon questions\u003c\/h2\u003e\n\u003ch3\u003eWhere is CNTRL P ABS made?\u003c\/h3\u003e\n\u003cp\u003eSydney. The extrusion line, the quality checking and the dispatch are all in the same building.\u003c\/p\u003e\n\u003ch3\u003eWhat printers does CNTRL P ABS work with?\u003c\/h3\u003e\n\u003cp\u003eAny printer that runs standard 1.75mm filament. It also supports the open filament tag standard, so a compatible machine can read the spool and load the right settings for it.\u003c\/p\u003e\n\u003ch3\u003eWhy only black and white?\u003c\/h3\u003e\n\u003cp\u003eBecause they are the easiest colours to keep identical from run to run, and they cover most real work. Prove the process on the colours that hold best, then add the ones that are harder.\u003c\/p\u003e\n\u003ch3\u003eCan I get a custom colour?\u003c\/h3\u003e\n\u003cp\u003eYes, and that is one of the real advantages of local extrusion. Bring a hex, a Pantone reference or a physical sample. See the \u003ca href=\"https:\/\/cntrlp.com.au\/custom-colour\"\u003ecustom colour page\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eDoes ABS need an enclosure?\u003c\/h3\u003e\u003cp\u003eABS prints far more reliably in an enclosure. ABS shrinks as it cools, and cold air on the part causes warping and cracks between layers. An enclosed printer keeps the air warm and still, which lets larger ABS parts finish without lifting off the bed.\u003c\/p\u003e\u003ch3\u003eWhat temperature should I print ABS at?\u003c\/h3\u003e\u003cp\u003eABS usually prints with the nozzle at 240 to 260°C and the bed at 90 to 110°C. Keep the part cooling fan off or very low. Higher chamber temperatures improve layer bonding and reduce warping on bigger ABS parts.\u003c\/p\u003e\u003ch3\u003eWhat is the difference between ABS and ASA?\u003c\/h3\u003e\u003cp\u003eABS and ASA print on very similar settings and have similar strength and heat resistance. The main difference is that ASA resists UV light and weather, so ASA keeps its colour and strength outdoors. ABS yellows and turns brittle in long term sun.\u003c\/p\u003e\u003cp\u003eMore about the range on the \u003ca href=\"https:\/\/siddament.com.au\/pages\/cntrl-p\"\u003eCNTRL P page\u003c\/a\u003e.\u003c\/p\u003e\u003ch2\u003eAbout ABS filament\u003c\/h2\u003e\u003cp\u003eABS is a strong, heat resistant 3D printer filament used for functional and mechanical parts. It holds its shape to around 100°C and can be sanded, glued and vapour smoothed. ABS needs a heated bed and an enclosure to avoid warping.\u003c\/p\u003e\u003ch3\u003eWhat ABS is good for\u003c\/h3\u003e\u003cp\u003eABS suits printer parts, automotive interior parts, housings and brackets that sit near heat. It machines and sands well and takes acetone smoothing. ABS gives off fumes while printing, so print it in an enclosure with ventilation or filtration. For outdoor parts ASA prints much the same and adds UV resistance.\u003c\/p\u003e\u003cp\u003eBrowse all \u003ca href=\"https:\/\/siddament.com.au\/collections\/all-abs\"\u003eABS filament\u003c\/a\u003e or the full \u003ca href=\"https:\/\/siddament.com.au\/collections\/cntrl-p-filament\"\u003eCNTRL P Australian made filament\u003c\/a\u003e range.\u003c\/p\u003e","brand":"CNTRL P","offers":[{"title":"Black","offer_id":67619186573591,"sku":null,"price":18.99,"currency_code":"AUD","in_stock":false},{"title":"White","offer_id":67619186606359,"sku":null,"price":18.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0685\/9168\/1815\/files\/cntrlp-spool-black.webp?v=1790684533"}],"url":"https:\/\/siddament.com.au\/en-us\/collections\/cntrl-p-filament.oembed","provider":"SIDDAMENT","version":"1.0","type":"link"}