Matte PLA vs Standard PLA: Which to Pick
Quick comparison
| Property | A | B |
|---|---|---|
| Finish | Glossy | Low-sheen matte |
| Hides layer lines | No | Yes (mineral filler) |
| Paintability | Needs primer prep | Primer-ready out of printer |
| Abrasiveness | Standard | Slightly abrasive |
| Cost | Lower | Slightly higher |
Pick A when
- Utility prints where finish does not matter
- Maximum cost efficiency
- Functional parts in a junk bin
Pick B when
- Miniatures and tabletop terrain
- Display pieces and cosplay
- Anything that will be painted
- Showcase prints