SIDDAMENT
PVP/VA Bed adhesion powder
PVP/VA Bed adhesion powder
62 in stock
Couldn't load pickup availability
Don’t spend $40 on bed adhesives and “polymer level glue” make it yourself for cheaper!
Add 50ml water + 50ml 99% alcohol + 1g powder
Each bag is 5grams so you can make up to 500ml which should last for thousands of prints
if using the entire bag mix 250:250:5
250ml water 250ml alcohol 5 grams powder
Mix thoroughly and apply to hot bed above 90c with either a spray bottle or a acrylic paint marker. This should Vaporise the goop and this should in turn leave a thin film of PVA powder on the bed increasing adhesion and this will also act as a release agent.
Apply every 5-10 prints for consistency sticking parts down.
Customer Reviews
I got this as I was having issues with 1st layer adhesion with PC. Filament was dried, used gluesticks, nothing worked. Sides were lifting, stringiness here and there. Gave this a mix with IPA and water and I'll let the results speak for itself. A must have for PC for me.
I followed the instructions and it produced a great product. Things stick to the build plate and come off easily whenit cools down. And it lasts as you only use a very small amount. It is also a lot cheaper than the other ones. It alsodoesnt leave marks on the print base.
Made neat into 70% iso alcohol and works brilliantly.
This stuff was sent down from a 3D Printing heaven to prevent all further suffering !
Works great, with PLA, abs and petg.
I am coiming from paying 40$ for "Nano polimer adhesive" and this is working just as great.
