Resources

Matte PLA vs Standard PLA

Matte PLA vs Standard PLA: Which to Pick The short version Standard PLA is glossy. Matte PLA contains mineral filler that gives a soft low-sheen finish, hides layer lines visually,...

ASA vs ASA CF

ASA vs ASA CF: When to Add Carbon Fibre The short version Standard ASA holds up to outdoor UV and moderate heat. ASA CF adds carbon fibre for extra stiffness...

PLA vs HTPLA

PLA vs HTPLA: Standard vs Heat-Treatable The short version Standard PLA softens at 55 C and is done. HTPLA can be oven-baked after printing to crystallise the polymer, raising the...

Best Filament for Action Figures

Best Filament for Action Figures and Posable Models The short version Action figures and posable models combine joint surfaces (needs slight grip) with paintable shells (matte PLA wins). PLA+ for...

Best Filament for Hooks and Brackets

Best Filament for Hooks and Wall Brackets The short version Wall hooks and brackets need to hold weight over time. PLA creeps and sags. PETG is the everyday pick. ASA...

Best Filament for Organisers

Best Filament for Organisers and Drawer Dividers The short version Drawer organisers, desk trays and household dividers benefit from PETG's heat tolerance and impact resistance. PLA works for prototype layouts...