SIDDAMENT X N3D
Crystal sparkle rainbow PLA
Crystal sparkle rainbow PLA
Low stock: 19 left
Couldn't load pickup availability
PET CF Filament Produced By Nature3d
Engineering filament combining PET-G with chopped carbon fibres. The carbon fibre reinforcement adds stiffness, dimensional stability, and a matte black finish, while the PET-G base prints more easily than higher-temp engineering plastics. Well suited to functional parts, drone frames, mechanical brackets, and tools where stiffness matters.
Print profile
Nozzle 250-265 °C, bed 70-90 °C. Use a hardened steel or wear-resistant nozzle — carbon fibre is abrasive and will quickly wear out a brass nozzle. Dry the spool before printing for best surface finish and layer adhesion.
Examples of enclosed printers: Bambu X1C / P1S, Prusa CORE One, Voron 2.4 / Trident, Qidi X-Plus, anything with sealed doors and a hot chamber.
Examples of open printers: Bambu A1 / A1 mini, Prusa MK4 / MINI, Ender 3, most bedslingers. These are fine for PLA / PETG / TPU / PVA but struggle with materials marked “Required” on this row — ABS, ASA, PC, Nylon and similar will warp or delaminate without a hot chamber.
* Depends on your dryer. If you’ve got a strong dryer (Sunlu S2/S4, PrintDry Pro, Eibos, etc.) 55 °C max is plenty. If your dryer is a weak boi (basic food dehydrator, cheap clip-on, fan-only) push it to 70 °C to actually move moisture out.
All sheets verified against Nature3D / N3D manufacturer documentation. Click any button to download or open in a new tab.
