SIDDAMENT SKU: 7.023
Wood PETG
Wood PETG
Low stock: 16 left
Couldn't load pickup availability
WOOD infused PETG
Contains real wood that can be sanded back once printed and stained using varnish to give it a coloured finish. Great for aesthetic prints and can be used outdoors. The wood texture masks layers lines to ensure a smooth finish on the print.
Please note each roll of wood can be a slightly diffrent shade, they are all within the same colour but some are dark and some are light, thats just the properties of using real wood
Examples of enclosed printers: Bambu X1C / P1S, Prusa CORE One, Voron 2.4 / Trident, Qidi X-Plus, anything with sealed doors and a hot chamber.
Examples of open printers: Bambu A1 / A1 mini, Prusa MK4 / MINI, Ender 3, most bedslingers. These are fine for PLA / PETG / TPU / PVA but struggle with materials marked “Required” on this row — ABS, ASA, PC, Nylon and similar will warp or delaminate without a hot chamber.
* Depends on your dryer. If you’ve got a strong dryer (Sunlu S2/S4, PrintDry Pro, Eibos, etc.) 55 °C max is plenty. If your dryer is a weak boi (basic food dehydrator, cheap clip-on, fan-only) push it to 70 °C to actually move moisture out.
Datasheet provided by the upstream manufacturer for the SIDDAMENT-branded line. Values are indicative for general guidance only and must not be relied upon for safety-critical or regulatory use. Siddament Pty Ltd assumes no liability for outcomes derived from this datasheet. Full Summary / SDS / RoHS / REACH documents are not currently issued for this line.
