ABS Filament Australia: Full Range and What We Stock
ABS variants in stock
- Standard ABS: the engineering classic, ~95 C continuous heat
- ABS V2: updated formulation, consistent spool weight
- Matte ABS: low-sheen finish over the heat-tolerant base
- ABS GF: glass-fibre reinforced for added stiffness
- Infuse ABS: pigment-rich variant
- CTRL V ABS Pro V5: alternative formulation
Print at a glance
- Nozzle: 240 to 260 C
- Bed: 95 to 110 C with ABS slurry or glue stick
- Enclosure: strongly recommended (warps without)
- Layer fan: off or below 20 percent after first 30 layers
- Brim: 8 to 12 mm on tall or large prints
Best uses for ABS
- Tool housings and electronics enclosures (indoor)
- Lego-style functional bricks
- Automotive interior trim and panels
- Vapour-smoothable display pieces (acetone smoothing)
- RC car bodies and drone parts
- Parts that face indoor heat (under-bonnet, near LEDs)
ABS vs ASA
ASA has the same print difficulty as ABS but is UV-stable, so it survives outdoor sun. ABS yellows and embrittles in sunlight over months. Pick ASA for anything outdoor; ABS for indoor heat-tolerant parts.
Sydney 24/7 pickup
Sydney customers can collect at any hour from the 24/7 self-serve pickup locker at the Siddament warehouse, 90 Victoria Road, North Parramatta NSW 2151. Order online, pick up at 2 am if you need to.
Browse the range
All ABS, Standard ABS, ABS V2, Matte ABS, ABS GF, Infuse ABS.