SIDDAMENT X N3D SKU: 4.074
Light Weight PLA Black
Light Weight PLA Black
Low stock: 3 left
Couldn't load pickup availability
Light Weight PLA for use in RC applications
Foaming Light Weight PLA in black. When printed hot, the filament foams and expands, producing parts up to ~40% lighter than standard PLA at the same volume. Designed for RC aircraft, drones, and weight-sensitive structures where stiffness-to-weight matters more than absolute strength.
Print profile
Nozzle 230-260 °C to activate foaming (higher temp = more expansion = lighter and weaker; lower temp = less expansion = denser and stronger). Tune flow rate down to compensate for the expansion. Bed 0-60 °C, no enclosure required.
Examples of enclosed printers: Bambu X1C / P1S, Prusa CORE One, Voron 2.4 / Trident, Qidi X-Plus, anything with sealed doors and a hot chamber.
Examples of open printers: Bambu A1 / A1 mini, Prusa MK4 / MINI, Ender 3, most bedslingers. These are fine for PLA / PETG / TPU / PVA but struggle with materials marked “Required” on this row — ABS, ASA, PC, Nylon and similar will warp or delaminate without a hot chamber.
* Depends on your dryer. If you’ve got a strong dryer (Sunlu S2/S4, PrintDry Pro, Eibos, etc.) 55 °C max is plenty. If your dryer is a weak boi (basic food dehydrator, cheap clip-on, fan-only) push it to 70 °C to actually move moisture out.
All sheets verified against Nature3D / N3D manufacturer documentation. Click any button to download or open in a new tab.
