SIDDAMENT SKU: 8.001
Matte Black PLA
Matte Black PLA
45 in stock
Couldn't load pickup availability
Pantone Black 6 C · #0A0C10
Matte PLA filament make your prints layer lines disappear! (note the matting agent used to make it matte is now a inorganic matting agent)
Sidd's Notes and applications
This is the darkest colour of PLA I currently have, compare it to a black sharpie after its dry, its essentially got that same finish of matte but a slight sheen to it. As you can probably see this is one of the most popular filaments as it is the perfect base colour to print Mini figurines, stands, hooks, nerf blasters... its pretty much the best colour! Please keep the printed parts below 60c as they can go floppy at that temperature.
Examples of enclosed printers: Bambu X1C / P1S, Prusa CORE One, Voron 2.4 / Trident, Qidi X-Plus, anything with sealed doors and a hot chamber.
Examples of open printers: Bambu A1 / A1 mini, Prusa MK4 / MINI, Ender 3, most bedslingers. These are fine for PLA / PETG / TPU / PVA but struggle with materials marked “Required” on this row — ABS, ASA, PC, Nylon and similar will warp or delaminate without a hot chamber.
* Depends on your dryer. If you’ve got a strong dryer (Sunlu S2/S4, PrintDry Pro, Eibos, etc.) 55 °C max is plenty. If your dryer is a weak boi (basic food dehydrator, cheap clip-on, fan-only) push it to 70 °C to actually move moisture out.
Datasheet provided by the upstream manufacturer for the SIDDAMENT-branded line. Values are indicative for general guidance only and must not be relied upon for safety-critical or regulatory use. Siddament Pty Ltd assumes no liability for outcomes derived from this datasheet. Full Summary / SDS / RoHS / REACH documents are not currently issued for this line.
