SIDDAMENT SKU: 7.023
Wood PETG
Wood PETG
28 in stock
Couldn't load pickup availability
WOOD infused PETG
Contains real wood that can be sanded back once printed and stained using varnish to give it a coloured finish. Great for aesthetic prints and can be used outdoors. The wood texture masks layers lines to ensure a smooth finish on the print.
Please note each roll of wood can be a slightly diffrent shade, they are all within the same colour but some are dark and some are light, thats just the properties of using real wood
Examples of enclosed printers: Bambu X1C / P1S, Prusa CORE One, Voron 2.4 / Trident, Qidi X-Plus, anything with sealed doors and a hot chamber.
Examples of open printers: Bambu A1 / A1 mini, Prusa MK4 / MINI, Ender 3, most bedslingers. These are fine for PLA / PETG / TPU / PVA but struggle with materials marked “Required” on this row — ABS, ASA, PC, Nylon and similar will warp or delaminate without a hot chamber.
* Depends on your dryer. If you’ve got a strong dryer (Sunlu S2/S4, PrintDry Pro, Eibos, etc.) 55 °C max is plenty. If your dryer is a weak boi (basic food dehydrator, cheap clip-on, fan-only) push it to 70 °C to actually move moisture out.
Datasheet provided by the upstream manufacturer for the SIDDAMENT-branded line. Values are indicative for general guidance only and must not be relied upon for safety-critical or regulatory use. Siddament Pty Ltd assumes no liability for outcomes derived from this datasheet. Full Summary / SDS / RoHS / REACH documents are not currently issued for this line.
