SIDDAMENT
Shittament Silk PLA
Shittament Silk PLA
In Stock — 841 available
Shittament — V1 transition rolls. Silk PLA, random mystery colour from the factory's colour changeover runs.
Full 1kg spool, 1.75mm, on the V1 spool. You get what comes off the run, so colour is luck of the draw. Rolls may need drying, otherwise they are completely fine.
Colours might be the same in a box of 10, but again each roll can be totally different or identical.
Best use case for Shittament is prototyping where colours do not matter.
Examples of enclosed printers: Bambu X1C / P1S, Prusa CORE One, Voron 2.4 / Trident, Qidi X-Plus, anything with sealed doors and a hot chamber.
Examples of open printers: Bambu A1 / A1 mini, Prusa MK4 / MINI, Ender 3, most bedslingers. These are fine for PLA / PETG / TPU / PVA but struggle with materials marked “Required” on this row — ABS, ASA, PC, Nylon and similar will warp or delaminate without a hot chamber.
* Depends on your dryer. If you’ve got a strong dryer (Sunlu S2/S4, PrintDry Pro, Eibos, etc.) 55 °C max is plenty. If your dryer is a weak boi (basic food dehydrator, cheap clip-on, fan-only) push it to 70 °C to actually move moisture out.
Datasheet provided by the upstream manufacturer for the SIDDAMENT-branded line. Values are indicative for general guidance only and must not be relied upon for safety-critical or regulatory use. Siddament Pty Ltd assumes no liability for outcomes derived from this datasheet. Full Summary / SDS / RoHS / REACH documents are not currently issued for this line.
