Ziro SKU: 2.023
Rusted Jungle Tri Colour Matte PLA
Rusted Jungle Tri Colour Matte PLA
In Stock — 29 available
Made by the community
What will you print?
Real customer projects. Prints may combine multiple filaments; materials are listed below.
By Kirsten
See the customer gallery for the full material details.
Product details & specifications
Matte gradient finish which changes softly
Ziro single-spool gradient PLA in the Rusted Jungle Tri Colour palette. Colours transition gradually along the filament so a single print walks through the full spectrum without any filament changes, no AMS or multi-tool setup needed. The matte finish softens the gradient and hides layer lines for a clean, painterly look.
Print profile
Standard PLA settings: nozzle 200-220 °C, bed 0-60 °C, no enclosure required. Prints on any PLA-capable machine. Bigger and taller prints reveal more of the gradient — vases, lithophanes, and tall single-walled models show it off best.
Examples of enclosed printers: Bambu X1C / P1S, Prusa CORE One, Voron 2.4 / Trident, Qidi X-Plus, anything with sealed doors and a hot chamber.
Examples of open printers: Bambu A1 / A1 mini, Prusa MK4 / MINI, Ender 3, most bedslingers. These are fine for PLA / PETG / TPU / PVA but struggle with materials marked “Required” on this row — ABS, ASA, PC, Nylon and similar will warp or delaminate without a hot chamber.
* Depends on your dryer. If you’ve got a strong dryer (Sunlu S2/S4, PrintDry Pro, Eibos, etc.) 55 °C max is plenty. If your dryer is a weak boi (basic food dehydrator, cheap clip-on, fan-only) push it to 70 °C to actually move moisture out.
