SIDDAMENT X N3D SKU: 7.040
PVA 0.5kg
PVA 0.5kg
Out of stock
Couldn't load pickup availability
PVA Water-Soluble Support Filament
PVA (Polyvinyl Alcohol) is a water-soluble support material for use as the secondary filament in dual-extrusion 3D printers. Print complex internal geometry, overhangs, and trapped cavities, then dissolve the supports away in warm water — no manual support removal, no surface scarring.
Print profile
Nozzle 190-220 °C, bed 45-60 °C. PVA is hygroscopic and degrades fast in humid air — store the spool in a sealed dry box with desiccant and only load it when ready to print. 0.5 kg spool.
Examples of enclosed printers: Bambu X1C / P1S, Prusa CORE One, Voron 2.4 / Trident, Qidi X-Plus, anything with sealed doors and a hot chamber.
Examples of open printers: Bambu A1 / A1 mini, Prusa MK4 / MINI, Ender 3, most bedslingers. These are fine for PLA / PETG / TPU / PVA but struggle with materials marked “Required” on this row — ABS, ASA, PC, Nylon and similar will warp or delaminate without a hot chamber.
* Depends on your dryer. If you’ve got a strong dryer (Sunlu S2/S4, PrintDry Pro, Eibos, etc.) 55 °C max is plenty. If your dryer is a weak boi (basic food dehydrator, cheap clip-on, fan-only) push it to 70 °C to actually move moisture out.
All sheets verified against Nature3D / N3D manufacturer documentation. Click any button to download or open in a new tab.
