SIDDAMENT
Dark Wood PLA
Dark Wood PLA
Out of stock
Couldn't load pickup availability
HEX: #8B7155 TD: 2.9
PLA with added wood dust 15% by weight, contains real wood! this filament can be sanded back and stained using wood oils and stains to change its final appearance, the wood surface finish hides layer lines as well!
Sidd's Notes and applications
This Wood PLA has a darker wood finish compared to the lighter one 🤯 (no shit) while the difference is very minor between both, the darker one has a singed or burnt sort of look. The filament would be perfect to make items that are not under too much stress as the added wood makes the filament brittle as compared to regular or matte pla. The heat tolerance is similar to normal pla as well.
Examples of enclosed printers: Bambu X1C / P1S, Prusa CORE One, Voron 2.4 / Trident, Qidi X-Plus, anything with sealed doors and a hot chamber.
Examples of open printers: Bambu A1 / A1 mini, Prusa MK4 / MINI, Ender 3, most bedslingers. These are fine for PLA / PETG / TPU / PVA but struggle with materials marked “Required” on this row — ABS, ASA, PC, Nylon and similar will warp or delaminate without a hot chamber.
* Depends on your dryer. If you’ve got a strong dryer (Sunlu S2/S4, PrintDry Pro, Eibos, etc.) 55 °C max is plenty. If your dryer is a weak boi (basic food dehydrator, cheap clip-on, fan-only) push it to 70 °C to actually move moisture out.
Datasheet provided by the upstream manufacturer for the SIDDAMENT-branded line. Values are indicative for general guidance only and must not be relied upon for safety-critical or regulatory use. Siddament Pty Ltd assumes no liability for outcomes derived from this datasheet. Full Summary / SDS / RoHS / REACH documents are not currently issued for this line.
