SIDDAMENT
Matte Why Obi Green PLA
Matte Why Obi Green PLA
58 in stock
Couldn't load pickup availability
HEX #CCDA46 *Please note as I fine tune these filament colours, each batch may be slightly different in shade, this warning will go away once they are at a correct colour
Matte PLA filament make your prints layer lines disappear! (note the matting agent used to make it matte is now a inorganic matting agent)
Sidd's Notes and applications
Inspired by but not associated with Ryobi power tools, this is a Green finish to match the colour of their accessories. This can be used for drill mounts, battery adapters and anything else as long as the printed part is placed in temperatures below 60c, this is the perfect material to use!
Colour Variation Disclaimer
Colour Variation Disclaimer
I will always aim for having the same colour across multiple batches, but with such a wide range of materials, a colour variation between batches is bound to happen eventually, while it is rare, it can still occur. If a colour is noticeably different it will be sold off as clearance stock.
| 🔥 Hotend Temperature | 190-220°C |
|---|---|
| ♨️ Heated Bed Temperature | 60°C |
| 🏠 Enclosure | Not Required |
| 🛠️ Hardened Nozzle | Not Required |
| 💨 Drying Settings | 40-45°C for 4-6 hours |
| 🎨 Colour Stability | ✅ Stable |
| ⚙️ Diameter | 1.75mm |
| ⚖️ Weight | 1kg |
| 📦 Next Stock Comes | May 30, 2025 (in 33 days) |
