OFD Meowser/Anoid Meowser Hardware Kit

The OFD Meowser is a flywheeler pistol designed by Old Fusion Designs using his Flycore system. Available in full-auto (N20 gear motor) and semi-auto (OOD Neutron Solenoid), this 3D-printed blaster is a fun, versatile flywheel blaster to build and play with.

This Hardware kit contains all of the required and optional hardware you need to build a Meowser blaster from your own 3D-printed parts. Links to Flycore and Meowser 3D files are linked below.

FEATURES:
• All hardware recommended by the designer
• Includes optional hardware
• flywheel and motor selection based off what you want for your blaster
• Just add a LiPo, alarm and charger and you're good to go!

INCLUDES:
• 2x - Motors (Kraken/Fang ReVamp/Loki)
• 1x - N20 Gear Motor (300-2000 RPM) or Neutron Solenoid with Diode
• 1x - Flywheel Pair (Kepler/Daybreak/Pulsar/Worker Micro/FTW micro)
• 9x - M2x5mm Cage Screw
• 14x - Brass Heat Set Insert
• 23x - M3x8mm Cup Head Screw
• 8x - M3x12mm Cup Head Screw
• 9x - M2.6x12mm Toy Screw
• 1x - M2.6x10mm Toy Screw
• 1x - M3x8mm Button Head Screw
• 1x - M3 Thumbscrew
• 1x - 10A Cherry Lever Switch
• 1x - 10A Cherry Button Switch
• 1x - 21A Tezuo Button Switch
• 2x - Springs (Mag Release/Trigger)
• 18 AWG Silicone Hobby wire
• 22 AWG Silicone Hobby wire
• 1x - XT-30 M/F Pair
• Pre cut Heat Shrink

Note: No 3D-printed parts are included with this kit

LINKS:
• Compatible Standard Talon Magazines
• LiPo Alarm
• Charger 
• Voltage Meter
• Holdster Magnets

Meowser Files
Anoid Meowser Files
Flycore Straight Files