Siddament V2 SKU: 3.002
Space Grey PLA+
Space Grey PLA+
Out of stock
Regular price
$14.00 USD
Regular price
$14.00 USD
Sale price
$14.00 USD
Unit price
per
Tax included.
Shipping calculated at checkout.
Couldn't load pickup availability
- Neat winding
- PLA+ Stronger than Normal PLA
- Satin/Gloss finish
- +-0.03 Variance in diameter
- Consistent Colours throughout batches
- Refill master spool, reuse the spools after you use your filament and AMS compatible
Notes/ Colour Description
A more premium, smoother printing, neatly winded offering of pla, with CONSISTENT COLOURS that do not change throughout the batches!
🔥 Print Settings
🌡️ Hotend190-220°C
This temp range may not match what is printed on the spool. With the wide variety of 3D printers and platforms out there, branded machines often print at slightly different temps — some run hotter, some cooler. I have built slicer profiles for the popular printers (see the Slicer Profiles button below); if yours is not covered, use your printer’s generic temp for this material family as a starting point and tune from there. Trust the value here for the most accurate range — the site is updated as I learn from each batch.
♨️ Heated Bed60°C
🏠 EnclosureNot Required
“Enclosure” = a closed chamber that holds heat — not just walls around your printer. The chamber needs to actually get warm (passively from the bed, or actively heated) so the print stays at a consistent temperature and doesn’t warp or split between layers.
Examples of enclosed printers: Bambu X1C / P1S, Prusa CORE One, Voron 2.4 / Trident, Qidi X-Plus, anything with sealed doors and a hot chamber.
Examples of open printers: Bambu A1 / A1 mini, Prusa MK4 / MINI, Ender 3, most bedslingers. These are fine for PLA / PETG / TPU / PVA but struggle with materials marked “Required” on this row — ABS, ASA, PC, Nylon and similar will warp or delaminate without a hot chamber.
Examples of enclosed printers: Bambu X1C / P1S, Prusa CORE One, Voron 2.4 / Trident, Qidi X-Plus, anything with sealed doors and a hot chamber.
Examples of open printers: Bambu A1 / A1 mini, Prusa MK4 / MINI, Ender 3, most bedslingers. These are fine for PLA / PETG / TPU / PVA but struggle with materials marked “Required” on this row — ABS, ASA, PC, Nylon and similar will warp or delaminate without a hot chamber.
🛠️ Hardened NozzleNot Required
A hardened steel (or ruby / tungsten / diamond-tipped) nozzle is recommended for any abrasive filament — carbon-fibre, glass-fibre, sparkle/glitter, glow-in-the-dark, marble, wood, metal-filled, etc. Brass nozzles wear out quickly with these materials and the bore enlarges, ruining flow accuracy. For plain PLA, PETG, ABS, ASA, TPU, PVA, PC and other non-abrasive blends, a stock brass nozzle is fine.
💨 Drying40-45°C / 4-6 hours
Although the value above is the textbook drying recommendation for this material, Sidd’s rule is: dry every roll for at least 12 hours, at a minimum of 50 °C and around 70 °C on average*. If you’re drying multiple materials in the same dryer, average them out and lean towards 70 °C — it’s safe for everything we sell and gives the most consistent print results.
* Depends on your dryer. If you’ve got a strong dryer (Sunlu S2/S4, PrintDry Pro, Eibos, etc.) 55 °C max is plenty. If your dryer is a weak boi (basic food dehydrator, cheap clip-on, fan-only) push it to 70 °C to actually move moisture out.
* Depends on your dryer. If you’ve got a strong dryer (Sunlu S2/S4, PrintDry Pro, Eibos, etc.) 55 °C max is plenty. If your dryer is a weak boi (basic food dehydrator, cheap clip-on, fan-only) push it to 70 °C to actually move moisture out.
🧪 Material
🌡️ HDT (typical)~53°C
📏 Length~330 m
🧊 Density1.24 g/cm³
⚙️ Diameter1.75 mm
🎨 Colour Stability✅ Stable
I always aim for the same colour across batches, but with the huge range of materials I produce, a slight variation between batches is bound to happen eventually. It’s rare, but it can occur. If a batch is noticeably different it gets sold off as clearance stock rather than mixed in with the standard range.
📦 Weight & Stock
🔖 SKU3.002
⚖️ Net Weight (filament)1kg
📦 Packaging Weight0.4 kg
🚚 Shipping Weight1.4 kg
📅 Next Stock
June 22, 2026
(in 17 days)· 100 coming
Manufacturer-issued datasheets for the SIDDAMENT V2 material line. Click any button to download or open in a new tab.
V2
Refined filament for precision and consistency.
± 0.03 mm diameter tolerance
Dried before production and before packaging
Colour-indicating silica in every roll
Engineered consistency
Dimensional stability and colour uniformity between batches.
Laser-gauged filament diameter targets
Uniform colour and texture across runs
Reduced drying time — often none required
Ready to print
Open, load, print — stable feed and clean layers.
Accurate winding and tension control
Splittable reusable spools
The TPU spool is translucent red.
The PETG spool is translucent blue.
The PLA spool is transparent.
The CF spool is black.