• G10 build plate, placeholder photo
  • G10 build plate, placeholder photo
  • G10 build plate, placeholder graphic
1 3

SIDDAMENT G10.02

G10 Build Plate — Ender 3 / Kobra / KP3S (220 × 220mm)

G10 Build Plate — Ender 3 / Kobra / KP3S (220 × 220mm)

Out of Stock

$0.00 AUD
$0.00 AUD
Sale Sold out
Tax included. Shipping calculated at checkout.
Size: 220 x 220mm 180 x 180A1 MiniSold out 220 x 220Ender 3 / Kobra 235 x 235Ender 3 V3 / Neptune 4Sold out 241 x 254Prusa MK3 / MK4Sold out 256 x 256Bambu X1 / P1 / P2 / A1Sold out 305 x 305CORE One L / Voron 300Sold out 330 x 320Bambu H2CSold out 346.5 x 355Bambu H2D / H2SSold out 355 x 355Voron 350Sold out
📦
Next Restock
Not Yet Ordered No ETA
Check back soon

Rigid G10 build plate cut to size for 220 × 220mm beds. G10, also sold as Garolite or FR4, is a glass fibre reinforced epoxy laminate, and it is one of the best surfaces going for engineering filaments.

Nylon, polycarbonate, ABS, ASA and PETG grip it while the bed is hot and release cleanly as it cools. No glue stick, no hairspray, no tape. It stays flat under heat and it does not wear out the way a PEI coating eventually does.

Plate size: 220 × 220mm
Material: G10 glass epoxy laminate
Fits: Creality Ender 3 and Ender 3 V2, Anycubic Kobra, Kingroon KP3S

Finished with the SIDDAMENT logo on the front edge.

Datasheets & ComplianceIndicative onlyPLA
📊 TDS technical data

Datasheet provided by the upstream manufacturer for the SIDDAMENT-branded line. Values are indicative for general guidance only and must not be relied upon for safety-critical or regulatory use. Siddament Pty Ltd assumes no liability for outcomes derived from this datasheet. Full Summary / SDS / RoHS / REACH documents are not currently issued for this line.

View full details