SIDDAMENT X N3D SKU: 4.058
Black Polypropylene (PP) 0.75kg
Black Polypropylene (PP) 0.75kg
In Stock
PP Filament Produced By Nature3d
Polypropylene (PP) is the tough, light plastic used for food containers, flip-top lids and chemical bottles. It is very fatigue resistant, so printed living hinges and snap fits keep flexing without cracking, and it shrugs off most acids, alkalis and solvents. It is light too: at about 0.9 g/cm³ this 0.75kg spool holds roughly the same length as a 1kg spool of PLA (about 340m).
Prints at 200-240°C with an 80-110°C bed. PP does not stick to normal build surfaces, so print it on a PP sheet or PP packing tape, and use an enclosure on bigger parts to keep warping down. Not abrasive, a standard brass nozzle is fine.
Examples of enclosed printers: Bambu X1C / P1S, Prusa CORE One, Voron 2.4 / Trident, Qidi X-Plus, anything with sealed doors and a hot chamber.
Examples of open printers: Bambu A1 / A1 mini, Prusa MK4 / MINI, Ender 3, most bedslingers. These are fine for PLA / PETG / TPU / PVA but struggle with materials marked “Required” on this row — ABS, ASA, PC, Nylon and similar will warp or delaminate without a hot chamber.
* Depends on your dryer. If you’ve got a strong dryer (Sunlu S2/S4, PrintDry Pro, Eibos, etc.) 55 °C max is plenty. If your dryer is a weak boi (basic food dehydrator, cheap clip-on, fan-only) push it to 70 °C to actually move moisture out.
