SIDDAMENT
Matte Charcoal Black PLA
Matte Charcoal Black PLA
Out of stock
Couldn't load pickup availability
HEX: #1C1C1C TD: 0.1
Matte PLA filament make your prints layer lines disappear! (note the matting agent used to make it matte is now a inorganic matting agent)
Sidd's Notes and applications
Compared to the standard matte black pla, this charcoal pla is a shade lighter. Picture a black permanent marker writing on a paper then placing that paper under a bright light. Its still black but with a highlight of grey or the "Ashy" finish. Applicable to be used in regular household items, figurines and models, as long as the printed part is placed in temperatures below 60c, this is the perfect material to use! this can be used outdoors but on a hot 45c day the black can absorb a lot more heat and flop over.
Colour Variation Disclaimer
Colour Variation Disclaimer
I will always aim for having the same colour across multiple batches, but with such a wide range of materials, a colour variation between batches is bound to happen eventually, while it is rare, it can still occur. If a colour is noticeably different it will be sold off as clearance stock.
| 🔥 Hotend Temperature | 190-220°C |
|---|---|
| ♨️ Heated Bed Temperature | 60°C |
| 🏠 Enclosure | Not Required |
| 🛠️ Hardened Nozzle | Not Required |
| 💨 Drying Settings | 40-45°C for 4-6 hours |
| 🎨 Colour Stability | ✅ Stable |
| ⚙️ Diameter | 1.75mm |
| ⚖️ Weight | 1kg |
| 📦 Next Stock Comes | April 25, 2025 (in 22 days) |
Excellent product, dried in oven at 50 degrees for 4 hours before use. No issues.
