Ziro SKU: 2.012
Shadow Tri Colour Matte PLA
Shadow Tri Colour Matte PLA
In production Minimum 25 days from the day it ships from China.
Matte gradient finish which changes softly
Ziro single-spool gradient PLA in the Shadow Tri Colour palette. Colours transition gradually along the filament so a single print walks through the full spectrum without any filament changes, no AMS or multi-tool setup needed. The matte finish softens the gradient and hides layer lines for a clean, painterly look.
Print profile
Standard PLA settings: nozzle 200-220 °C, bed 0-60 °C, no enclosure required. Prints on any PLA-capable machine. Bigger and taller prints reveal more of the gradient — vases, lithophanes, and tall single-walled models show it off best.
Examples of enclosed printers: Bambu X1C / P1S, Prusa CORE One, Voron 2.4 / Trident, Qidi X-Plus, anything with sealed doors and a hot chamber.
Examples of open printers: Bambu A1 / A1 mini, Prusa MK4 / MINI, Ender 3, most bedslingers. These are fine for PLA / PETG / TPU / PVA but struggle with materials marked “Required” on this row — ABS, ASA, PC, Nylon and similar will warp or delaminate without a hot chamber.
* Depends on your dryer. If you’ve got a strong dryer (Sunlu S2/S4, PrintDry Pro, Eibos, etc.) 55 °C max is plenty. If your dryer is a weak boi (basic food dehydrator, cheap clip-on, fan-only) push it to 70 °C to actually move moisture out.
